Promag CON-485 Series Instruções de Operação descarregar pdf (Página 44)

5 Operation / adjusting device settings - Set-up to commissioning Memo-Graph S

44 Endress+Hauser

Description “H” Description of the status when the combination is logically true (“H”). Only for logical combination.

Description “L” Description of the status when the combination is logically incorrect (“L”). Only for logical combination.

Events text L->H Description of the status change from logically incorrect (“L”) to logically true (“H”). Only for logical combination.

Events text H->L Description of the status change from logically true (“H”) to logically incorrect (“L”). Only for logical combination.

Message window “Display + acknowledge”: message window must be acknowledged by pressing the button.

“Do not display”: no message window. The events are just listed in the events list.

Display The results of the combination are saved at defined intervals (e.g. daily, monthly, ... - see Chapter 5.7.3 “Signal analy-

sis”). Here, the counter type is selected that is to be displayed constantly.

Copy settings Copies the settings for this combination into the selected combination (incl. limit values). Both of the last positions of the

target channel's designation are replaced with its channel number.

Tip:

Makes device setting easier, if the same settings apply largely for several combinations (e.g. several counter sums).

Limit value 1...4 Settings only required if the result of the combination is also to be monitored for limit values.

For detailed settings, see digital input limit value settings.

Set-up -> Signal settings -> Digital combinations -> Combination x

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 97 98

Sem comentários

Promag CON-485 Series Instruções de Operação Página 44