Promag CON-485 Series Instruções de Operação Página 85
- Página / 98
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Memo-Graph S 10 Technical data
Endress+Hauser 85
10 Technical data
10.1 Function and system design
Measuring principle Electronic acquisition, recording and archiving of analogue and digital input signals.
Measuring system The connected analogue measuring points are measured at a scan cycle of 125 ms.
Galvanic isolation channel-channel: 60 V
P
.
Damping adjustable at 0...999.9 seconds per analogue input, system base damping negligible. The
data is saved in the internal memory (power failure secure FLASH technology) and onto mainte-
nance-free ATA flash memory cards. Long-term archiving is carried out at the PC, whereby the data
is transferred to the data carrier, via Ethernet or serially to the PC. Using the supplied PC software
package, the devices can be operated, read-out and the measurement data can be archived and visu-
alised.
10.2 Input values
Measured variable /
measuring range
10.2.1 Multifunction input board with 8 analogue channels (socket 1,
socket 2)
Available measuring ranges per channel:
Description Mesurement range Signal resolution/accuracy
Current
Input impedance
50 Ohm, max. 100
mA
4 to 20 mA 1 µA (with switchable open circuit monitor < 2 mA, event
message on display) / 0.15 % of measurement range
0 to 20 mA 1 µA / 0.15 % of measurement range
± 1 mA 0.05 µA / 0.25 % of measurement range
± 2 mA 0.1 µA / 0.25 % of measurement range
± 4 mA 0.2 µA / 0.25 % of measurement range
± 20 mA 1 µA / 0.20 % of measurement range
± 40 mA 2 µA / 0.20 % of measurement range
Voltage
Input impedance
1 MOhm, max. 60
V
P
0 to 1 V 0.05 mV / 0.20 % of measurement range
0 to 10 V 0.5 mV / 0.20 % of measurement range
± 20 mV 1 µV / 0.25 % of measurement range
± 50 mV 2.5 µV / 0.20 % of measurement range
± 100 mV 5 µV / 0.15 % of measurement range
± 200 mV 10 µV / 0.15 % of measurement range
± 1 V 0.05 mV / 0.15 % of measurement range
± 2 V 0.1 mV / 0.15 % of measurement range
± 5V 0.5 mV / 0.15 % of measurement range
± 10 V 0.5 mV / 0.15 % of measurement range
Thermocouples Type B (Pt30Rh-Pt6Rh):
0 to +1820 °C / 32 to 3308 °F
0.2 K / 0.25 % of measurement range from 600 °C /
1112 °F
Type J (Fe-CuNi):
-210 to +999.9 °C / -346 to 1832 °F
0.2 K / 0.25 % of measurement range from -100 °C /
-148 °F
Type K (NiCr-Ni):
-200 to +1372 °C / -328 to 2501.6 °F
0.1 K / 0.25 % of measurement range from -130 °C /
-202 °F
Type L (Fe-CuNi):
-200 to +900 °C / -328 to 1652 °F
0.1 K / 0.25 % of measurement range
Type N (NiCrSi-NiSi):
-270 to +1300 °C / -454 to 2372 °F
0.1 K / 0.25 % of measurement range from -100 °C /
-148 °F
Type R (Pt13Rh-Pt):
-50 to +1800 °C / -58 to 3272 °F
0.1 K / 0.25 % of measurement range from +50 °C /
122 °F
Type S (Pt10Rh-Pt):
0 to +1800 °C / 32 to 3272 °F
0.1 K / 0.25 % of measurement range from +50 °C /
122 °F
- Safety Data Manager (SDM) 1
- Memo-Graph S 1
- Overview 2
- Brief overview 2
- CHANGE PROTOCOL 3
- Table of contents 5
- 1 Safety instructions 7
- 1.4 Operational safety 8
- 1.5 Return 8
- 2 Identification 9
- 2.1.2 Product structure 10
- 3 Installation 11
- 3.3 Installation instructions 12
- 3.4 Post-installation check 12
- 4 Wiring 13
- 4 Wiring Memo-Graph S 14
- 14 Endress+Hauser 14
- 4.2 Terminal diagram 15
- 4.2.5 CPU board (slot 0) 19
- Ethernet connection 21
- 4.4 Ingress protection class 22
- 4.5 Post-connection check 22
- Set-up to commissioning 23
- 5.5 Set-up using PC 26
- 5.7.1 Basic settings 27
- 5.7.2 Signal settings 31
- Factory setting “0” 32
- 36 Endress+Hauser 36
- # Warning! 37
- " Caution! 38
- Endress+Hauser 43 43
- 44 Endress+Hauser 44
- 5.7.4 Products 48
- 5.7.5 Texts 50
- 5.7.6 Administration 50
- 5.7.8 Service 53
- 5.9.1 RS 232 56
- 5.9.2 RS 485 56
- 5.9.3 PROFIBUS DP 56
- 5.10.2 MAC address 58
- 5.10.3 IP address allocation 58
- 5.10.4 Subnet mask allocation 59
- 5.10.5 Gateway allocation 59
- 21 CFR 11 61
- 6.2.3 Administration 63
- 6.2.5 Analogue inputs 64
- 6.3.1 General 64
- Endress+Hauser 67 67
- 68 Endress+Hauser 68
- 7 Procedure in operation 69
- 7.2 The functions in detail 72
- 7.2.3 Enter comment / text 74
- 7.2.5 Extras 74
- 7.2.6 Set-up 77
- 8Accessories 78
- Software 79
- Operating language 79
- RSG12A1 79
- 80 Endress+Hauser 80
- 9.4 Spare parts 81
- 9.4.2 Spare parts list 82
- Endress+Hauser 83 83
- 9.5 Repairs/return 84
- 9.6 Disposal 84
- Measured variable / 85
- _ _ _ _ _ 86
- 10.3 Output values 87
- 10.4 Power supply 87
- 10.5 Accuracy 88
- 10.6 Operating conditions 88
- 10.7 Mechanical construction 89
- 320 mm (12.6“) 91
- 320 mm (12.6 “) 91
- 254 mm (10 “) 91
- 10.9 Data storage 92
- 10.11 Accessories 93
- 10.12 Further documentation 93
- BA 138R/09/en/08.04 98
- 51006049 98
- FM+SGML 6.0 98
Manuais e produtos relacionados com Ferramentas de medição e layout Promag CON-485 Series
(40 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.097 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais